12.02.2011

From the Archives - Decoupage Fabric Plates

Every so often, I like to post popular tutorials from my archives - here is a full tutorial on how to make decoupage plates, using clear glass plates and cotton fabric. Don't let the Yankees fabric fool you, I am a proud Boston Red Sox fan!
 
I'll be posting some holiday plates this weekend that I have recently made, to give you some ideas for gifts. These are great for cookie swaps, neighbor or teacher presents also. 

Here's what you will need to complete this project: 

  • Round or square glass plates
  • Cotton fabric, in any design
  • Modge Podge, regular or with glitter
  • Scissors
  • Table covering
  • Paint cans to hold the plates while they dry
  • Matte or gloss clear spray paint


Start by finding some inexpensive glass plates, either at the consignment store or home goods store. Wash them and dry them completely. Next, cut the fabric about 1-2 inches wider than the plate you are using.

Put your first plate face down on a paint can and the piece of fabric face down on the table covering. Cover the back of the fabric with Modge Podge, flip it over carefully and cover the front generously as well. Then, lift the fabric off the table and place the design face down so that the design of the fabric is facing out (see picture). Use additional Modge Podge if necessary.

Use your hands to work out any air bubbles in the fabric, from the center out. Depending on the thickness and texture of the fabric, this may take some time. Move the plate to another paint can to dry thoroughly. Modge Podge goes on white and dries clear so you will be able to tell when it is ready for the next step.

Repeat for as many plates as you have. I made 3 New York Yankees plates, a gray & pink bird plate, which are both in my Etsy Store and a black striped plate, which didn't turn out the way I wanted and was scraped before the final step. Here is a production picture of them drying.

Once dry, carefully trim the excess off with a razor blade so that the edge is flush with the plate. (step not shown

In a well ventilated area, place the plates face down again on the paint cans. Using your clear spray paint, spray the backs of the plates completely. 

Finally, clean off any excess glue or fingerprints on the front with glass cleaner and paper towels. 

When you are all finished, your plates should look like this:

 
Happy Crafting - feel free to send me a link or picture if you try this project!

1 comment:

  1. This is a fantastic tutorial, I am so glad I ran into it. They will make awesome holiday accessories. Thank you!

    ReplyDelete