How to Make Decoupage Fabric Plates

Today was finally a nice day so I was able to tend to the outside work, like dragging out the patio furniture and raking the front gardens. Before the weekend comes to an end, I wanted to post my full tutorial on how to make decoupage glass plates with cotton fabric. 

Here's what you will need to complete this project: 

• Round or square glass plates
• Cotton fabric, in any design
• Modge Podge, regular or with glitter
• Scissors
• Table covering
• Paint cans to hold the plates while they dry
• Matte or gloss clear spray paint

Start by finding some inexpensive glass plates, either at the consignment store or home goods store. Wash them and dry them completely. Next, cut the fabric about 1-2 inches wider than the plate you are using.

Put your first plate face down on a paint can and the piece of fabric face down on the table covering. Cover the back of the fabric with Modge Podge, flip it over carefully and cover the front generously as well. Then, lift the fabric off the table and place the design face down so that the design of the fabric is facing out (see picture). Use additional Modge Podge if necessary.

Use your hands to work out any air bubbles in the fabric, from the center out. Depending on the thickness and texture of the fabric, this may take some time. Move the plate to another paint can to dry thoroughly. Modge Podge goes on white and dries clear so you will be able to tell when it is ready for the next step.

Repeat for as many plates as you have. I made 3 New York Yankees plates, a gray & pink bird plate, which are both in my Etsy Store and a black striped plate, which didn't turn out the way I wanted and was scraped before the final step. Here is a production picture of them drying.

Once dry, carefully trim the excess off with a razor blade so that the edge is flush with the plate. (step not shown) 

In a well ventilated area, place the plates face down again on the paint cans. Using your clear spray paint, spray the backs of the plates completely. 

Finally, clean off any excess glue or fingerprints on the front with glass cleaner and paper towels. 

When you are all finished, your plates should look like this:

Happy Crafting - feel free to send me a link or picture if you try this project!